Starlink Mini PoE DC Power Conversion Kit with 12v Accessory Output

This high performance POE injector enables you to convert your Starlink Mini (see chart in images for correct dish support) to run on DC power and over a standard ethernet cable eliminating the need for the Starlink power supply that relies on AC power and allowing for external router support (optional). This kit includes a DC Step up converted, PoE Injector and PoE to DC Splitter at the dish end, as well as weather resistant connectors at the dish end giving you everything you need except a standard CAT 6 ethernet to convert your Starlink Mini into a full functioning Starlink with PoE support. Whats better, unlike the factory Starlink mini, you can also connect this up to your Peplink router with a single cable instead of needing separate power and ethernet cables. This kit accepts standard CAT 6 ethernet cables allowing you to create the ultimate and custom cable length solution. The included weather resistant grommit will seal in your external CAT 6 connector ends ensuring a weather resistant seal for all weather use.  This kit accepts 9-30v DC power input via the DC power terminal and outputs 56v to the Starlink Mini dish. The kit also includes an optional 12v power output cable which can be used to power a Peplink router for a simplified solution with only one 12v power cable needed from your battery. 

Kit Incudes:

• High Wattage Step Up Converter and Passive POE Injector (accepts DC Input Voltage of 9-30v and outputs via POE at a max of 180W
• Starlink Mini PoE to DC/Ethernet adapter with 1000Mbps support and weather resistant connectors at the dish and ethernet connectors
• USB-A 12V accessory power output which can be used with optional cable to power Peplink router for simplified wiring.
• USB-C 5V output (not used, available for future low power)
• Wiring Instructions

Kit Requires

• Starlink Mini Dish (see pictures for compatible dish) 
• 12-24 fused Power Input from vehicle batteries. Note this unit can technically draw up to 200W and required proper cable gauge and fuses to avoid excess heat or an unsafe condition (not typical as Mini dish only uses about 60w but we recommend you size your installation correctly regardless for future proofing) . Typically 14-10 gauge on 12-24v input with a fused home run from house battery is recommended (possibly larger wire for longer runs, consult an electrician for proper wiring sizing on DC power systems). Note that by running the correct size wires you are future proofing as this kit can also be used with the Starlink Gen 3 dish by removing the PoE to DC/Ethernet adapter and using the standard Starlink Gen 3 ethernet cable included with the dish. 

Optional Accessories

• USB-A to 4 Pin Molex cable for powering Peplink routers with 4 pin power connector. See photos for details. 

Disclaimer: . This product has been tested by MobileMustHave staff to be functional and reliable. This kit is not designed to be used in conjunction with the Starlink router which may also output power and create an unsafe condition. This kit is also not designed to be operated with other PoE switches or accessories as Starlink uses proprietary passive PoE technology. Wiring diagrams are available in the listing page. We are not responsible for improper use or any damage as a result of using this product.