The Marathon 175A single-pole DIN-rail distribution block splits one power feed into four outgoing connections. Screw-clamp terminals and a detachable cover make it a compact option for electrical distribution enclosures.
- One independent circuit: one input and four outputs
- Rated 175A, 600V AC/DC
- Input wire range: 14–2/0 AWG; output wire range: 14–4 AWG
- Dimensions: 1 in. wide × 3 in. high × 2 9/16 in. deep
- Part Number: 6367T14
Stacking and mounting
Use the molded side attachment points to join multiple single-pole blocks side by side. The connection is mechanical only: each pole remains electrically separate. Mount the blocks on a DIN rail or screw-mount them flush to a suitable panel using the mounting holes.
Common RV and off-grid power uses
- Extend an existing 6 AWG AC run. Use the block as a junction when rerouting AC input or output wiring during an RV inverter/charger upgrade. Both terminal sizes accept 6 AWG. The larger input lug fits 14 AWG through 2/0 AWG, while the four smaller lugs fit 14 AWG through 4 AWG. Use only the positions the layout calls for; unused positions can stay empty.
- Bring parallel inverter outputs to a common junction. In a system specifically designed and configured for parallel operation, an installer can use a suitably rated junction on the AC output side. Confirm that the inverter maker’s wiring diagram and the block manufacturer’s instructions permit this block and the proposed terminal use. The block does not synchronize inverters and is not for tying independent AC sources together.
Have a qualified installer verify conductor sizing, overcurrent protection, and enclosure requirements for your system.
Installation and terminal protection
The detachable terminal cover helps guard against accidental contact with energized terminals when fitted. It does not replace a suitable electrical enclosure. Install the block in an electrical enclosure or dedicated, guarded wiring compartment that limits access and protects it from physical damage. Do not mount it exposed in living areas, walkways, high-traffic locations, or anywhere readily accessible to children or pets. Keep the cover fitted during normal operation.