Starlink High Performance DC Power Conversion (Cut Cable Option)

This high performance 320w POE injector enables you to convert your Starlink High Performance Dish to run on DC power only eliminating the need for the Starlink Power Supply. 

Kit Incudes:

• High Wattage POE Injector (accepts DC Input Voltage of 48-56v and outputs via POE)
• Category 8 RJ45 Shielded Tool-less RJ45 Termination Kit (Requires Wire Cutters and Razor Blade)

Kit Requires

• 48v-56v DC Power input. The unit will not function without either your own 48v DC power supply or the optional DC step up converter shown in the listing above. 
• Input side of the Step up converter requires 30A Fused Power Input at 12v or 15A Fused Power Input at 24V. Requires properly sized gauge input/output wire which will vary based on voltage and distance, typically 8-10 gauge on 12-24v input with a fused home run from house battery is required (possibly larger wire for longer runs, consult an electrician for proper wiring sizing on DC power systems). 

Disclaimer: . This product has been tested by MobileMustHave staff to be functional and reliable. In order to use this adapter you will have to modify your Starlink factory cable which will void the warranty of the cable and may void the warranty of your Starlink HP dish if installed improperly. You must have knowledge of how to terminate CAT 8 networking cables in order to use this product. The kit includes a termination end for tool-less termination however you still must carefully terminate the cable in the proper order for the disk to function. See wiring pinout diagram located in photos of listing. We are not responsible for improper use or any damage as a result of using this product improperly. We cannot assist you if you cut your cable and your dish is non functional as a result. We can ship you a replacement Starlink cable if necessary at a charge.