This mobile router is equipped with a single cellular modem. This device may have multiple SIM card slots but can connect to one cellular provider at a time. Single modem devices may include a USB port or expansion slot to add additional modems. Switching between SIM card slots can be done via the management console, typically in 30-60 seconds allowing time for the modem to reboot utilizing the auxiliary SIM slot(s). Higher-end single modem devices often have faster maximum download/upload speeds then other devices but lack the redundancy found in a multi-modem device. Our multi-modem collection of devices can be found here. 

Internet traffic can be routed in a variety of ways using Peplink's proprietary Outbound Policy Management Algorithms.  Single modem devices may be capable of utilizing SpeedFusion technology, also known as "WAN bonding", which may require separate licensing. Single modem devices can bond the single cellular connection with the devices WAN port or WIFI-as-WAN sources if the device supports these functions.  See SpeedFusion section on this page for additional information.

The mobile router is equipped with one or more category 12 LTE Advanced cellular modems with a maximum download speed of 600Mbps and a maximum upload speed of 150Mbps (typical speeds range from 10-75mbps depending on cellular network conditions and coverage). The category of the modem impacts the maximum upload and download speed of the device and what cellular bands or "channels" the device can connect to. Cellular bands act similarly to "channels" on television, each cellular provider broadcasts on specific bands. Category 12 modems support connecting to the primary bands of all major carriers such as Verizon, T-Mobile, Sprint and AT&T and include additional LTE secondary bands for increased speed and coverage in many areas. This includes access to Band 14, AT&T's FirstNET band. For a complete list of bands supported, click the documentation tab for detailed specifications.

Category 12 modems are extremely popular as they blend strong performance and maximum data plan compatibility. Category 12 modems are very popular for mobile workers and for those who consider the internet "mission-critical" (dual modem device recommended). Category 12 modems are capable of video calling, VOIP, streaming,  general internet use, and, when paired with a dual modem capable device, support bonding of multiple cellular connections. See SpeedFusion section for more information.

MobileMustHave is proud to announce we now have high-speed, high GB data plans available exclusively to our customers. Traditional cellular plans available directly from the carriers have data caps that are not suitable for active travelers. We have negotiated the ability to provide high gigabyte cellular data plans that operate on the top national networks. Take the guesswork out of activating other plans that don't work or are not authorized to work on our cellular routers with data plans from MobileMustHave. Our plans are ready to activate when your ready to travel and have no contracts so keep as long as you need and cancel anytime. 

This device is FirstNet Ready! FirstNet is the nationwide public safety communications platform dedicated to America's first responders. Being built with AT&T, in public-private partnership with the FirstNet Authority, FirstNet utilizes Band-14, which is reserved for public safety but is also being marketed as available to the public for additional bandwidth capacity. In testing Band-14 has been made available during non-emergency situations to the public to provide additional bandwidth and coverages to customers who have a modem that supports FirstNet's Band-14. Not all modems that support Band-14 are "FirstNet Certified" however they typically can connect to Band-14 in most areas. Information on FirstNet certifications can be found on Specification sheets located on the Documentation Tab. Additional information about FirstNet's use and technology can be found in this article from our friends at the RV Mobile Internet Resource Center.

InControl2 is Peplink's cloud-based endpoint management system. When connected to your devices, it aggregates data to generate useful reports on all aspects of your network. On a single screen, you can push configurations to any and all of your endpoints. If you need to dig deeper, you can remotely access the web admin of any device on your network.

For most MobileMustHave customers this features is not required, but it does allow your device to be accessible to you via the cloud.  This can be an advantage if you would like to remotely control your device, track your vehicles location (if GPS is enabled), and allow support access to remote in (when permission is granted).

InControl2 is included with all router purchases for 1-Year and is included with EssentialCare and PrimeCare Warranty Renewal Options. 

Peplink SmartCare optional extended warranty packages provide customers with Incontrol2 cloud management licensing, software updates, firmware updates, and extended factory warranty support with Advanced Replacement support for devices deemed defective by Peplink's warranty support department. SmartCare is a cost effective and convenient way to extend the warranty coverage of your Peplink device for customers who need Advanced Replacement services, and for customer's who have a Peplink device that is out of warranty and require warranty re-instatement. Warranty and license purchases are non-refundable due to manufacturer policies.

• Technical Support via Support Ticket via Peplink
• Firmware Upgrades
• InControl2 Cloud Management
• Hardware Warranty with Advanced Replacement (a fully-refundable deposit may be required to cross-ship replacement device)

Peplink EssentialCare optional extended warranty packages provide customers with Incontrol2 cloud management licensing, software updates, firmware updates, and extended factory warranty support for devices deemed defective by Peplink's warranty support department. EssentialCare is a cost effective and convenient way to extend the warranty coverage of your Peplink device for customers who do not need advanced replacement support. Note that EssentialCare cannot be purchased for devices outside of existing warranty. Warranty and license purchases are non-refundable due to manufacturer policies.

• 1-Year EssentialCare included with new Peplink device purchase
• Technical Support via Support Ticket via Peplink
• Firmware Upgrades
• InControl2 Cloud Management
• Hardware Warranty (requires device to be returned to Peplink prior to replacement being sent out)

Looking for the full specifications on this product? Not to worry, they are located above under the "Documentation" Tab just above by the product description.